Zero distance to manufacture

Zero distance to manufacture

ERP系统管理资源整合,厂内裂造控管交期快速

Products

  • undefined
undefined
+

ECO-316

Easy to operate, no experience required for cutting a precise tool.

END MILL & DRILL CUTTER

Product accessories:

Product inquiry
  • Feature
  • Practical Case(Picture)
  • Practical Case(Video)

  • Ø3mm ~ Ø16mm

     

    For SDC Wheel

    Carbide END Mill

     

    For CBN Wheel

    SG High Speed Drill

    Titanium Coated Drill

    Straight Shank Drill

    HSS END Mill

     

    Specification

    SDC & CBN Wheel

    ECO-316-1C

    ECO-316-1D

     

    Model NO. ECO-316 Motor 600W
    Capacity Ø3mm ~ Ø16mm R.P.M. 6000 R.P.M.
    Power Supply AC110V - AC220V
    Single Phase (60Hz/50Hz)    		 Weight 13 kg
    Grinding Wheel SDC#100

     

    Standard Accessories
    SDC Wheel #100 x 1pc 、 Handle x 1pc
    Hexagon Wrench 4mm x 1pc 10mm x 1pc、Power Cord x 1pc、Fuse x 2pcs

     

    Option Accessories
    Order No. Description
    ECO-316-1C CBN Wheel #100 ( For HSS drill ) Ø3mm ~ Ø16mm
    ECO-316-1D SDC Wheel #100 ( For Carbide drill ) Ø3mm ~ Ø16mm

     

    Operations

    • Install the power cord on the cutter.

    • Put the machine on a hard, level surface, then install the handle on the base.

     ***as shown on diagram #1

    • Lock the valve connector, then insert the pressurized blast connector into the air pressurized cooling system.

     ***as shown on diagram #2

    • Select the proper wheel and diameter of end mill drill Ø3mm~Ø16mm, put the end mill (drill) horizontally into the groove from right to left. Adjust the proper length for cut and tighten the base with Ø10mm Allen Key.

     Note: Make sure the end mill (drill) is locatched in V-groove.
     ***as shown on diagram #3

    • Switch on the machine.

    • Switch on the cooling system.

     Note: The usage life will be decreased if don't switch on the cooling system.
     ***as shown on diagram #4

    Hold and raise the handle to cut off the end mill (drill).

    ***as shown on diagram #5

    • Touch the wheel with a slight push motion.
    • Be sure with very slight push motion during cutting process, don't be fast or slow at will.
    • To avoid the material fly away, be sure with very slight push motion while the end mill (drill) is going to be cut off.

    • Switch off the machine.

    • Switch off the cooling system.

    • Loosen the base with 10mm Allen Key, then take out the end mill (drill)

     ***as shown on diagram #6

    Be sure to do every cleaning and maintenance well to maintain the usage life.

    Note: Please switch off the machine while replacing the wheel to ensure the security!

Online Inquiry

操作
移除
Submit Message