Zero distance to manufacture

Zero distance to manufacture

ERP系统管理资源整合,厂内裂造控管交期快速

Products

  • undefined
undefined
+

ESG-213X

Use NC Spotting Drill (for deep hole only).

SG HIGH SPEED DRILL GRINDER-X TYPE

Product accessories:

Product inquiry
  • Feature
  • Practical Case(Picture)
  • Practical Case(Video)

  • ESG-213X(Ø2mm-Ø13mm)

    Specification

    Model NO. ESG-213X Motor 150W
    Capacity Ø2mm ~ Ø13mm R.P.M. 5500 R.P.M.
    Drill Angle 1754 Weight 11.25 kg
    Power Supply AC110V - AC220V Single Phase (60Hz/50Hz) Grinding Wheel  

     

    Standard Accessories
    ER collets Ø2.5mm ~ Ø13mm (12pcs)
    CBN Wheel #200 x 1pc and #400 x 1pc

     

    Option Accessories
    Order No. Description
    ESG-213X-2D SDC Wheel #400 (For Carbide drill)

     

    Operations

     

    Collet Holder : bearing assembled

    (More easy & convenient for tighting)

    Set up the drill to the collet holder

    Follow up the steps 1,2,3,4 for set up the drill to the collet holder.(Without tightening)***as shown on diagram #1

    Set up the diameter of drill

    • Turn right the scale annulus to be "0" position
    • Adjust the scale to meet the diameter of the drill.
      ***as shown on diagram #2

    Set up the drill to the grinding position

    Insert the collet holder with drill and turn right, then tighten the drill by collet holder for set up the grinding position.
    ***as shown on diagram #3
    Attn: The scale annulus maybe not exact for the drill diameter, because of used drill or different model of drill. Any how, please always make sure the center edge of drill must be parallel with the gap of "Collet Holder".
    ***as shown on the right diagram

     

    Grind the end gash of drill

    Insert the collet holder with drill to the end gash grinding port and push to the grinding wheel slowly, then move left and right for de-burring to grind the end gash until the grinding sound disappeared. Take out the collet holder with drill and change to the other side (turn 180 degree) to grind again in same way as above mentioned.***as shown on diagram #4

    Grind the center point of drill

    Insert the collet holder with drill and push to the grinding wheel slightly, then move left and right for de-burring t to grind the center point of drill until the grinding sound disappeared. Take out the collet holder with drill and chang to the other side (turn 180 degree) to grind again in same way as above mentioned.***as shown on diagram #5
    Adjust the center point :
    Adjust "+" for bigger
    Adjust "-" for smaller

    Grind the secondary clearance angle of drill

    Insert the collet holder with drill to the secondary clearance angle grinding port and push to the grinding wheel slowly to grind the secondary clearance angle of drill until the grinding. Take out the collet holder with drill and change to the other side (turn 180 degree) to grind again in same way as above mentioned.***as shown on diagram #6
    Adjust the eng gash :
    Adjust "+" for bigger
    Adjust "-" for smaller

    ***Plase clean the grinding chip often for avoid the chip scrape to the grinding base and keep using life.

    This machine is guaranteed for one year under normal operating (expendable parts and wheels are exceptions)

Online Inquiry

操作
移除
Submit Message