Zero distance to manufacture
ERP系统管理资源整合,厂内裂造控管交期快速
- Feature
- Practical Case(Picture)
- Practical Case(Video)
-
model A
B
C
Air consumption Maximum suction flow rate weight Suction force wide long Total length t/min
t/min
KG
1515
150
150
180
45
31.2
9.2
135
1530
150
300
330
45
31.2
13.7
270
3030
300
300
330
45
31.2
23.4
540
3045
300
450
480
45
31.2
37
810
3060
300
600
630
45
31.2
48.6
1080
3075
300
750
780
113
203
50.4
1350
2020
200
200
230
45
31.2
12.1
240
2040
200
400
430
45
31.2
22.2
480
4040
400
400
430
45
31.2
42.5
960
4060
400
600
630
113
203
62.7
1440
4080
400
800
830
113
203
72.9
1920
40100
400
1000
1030
113
203
103.1
2400
2525
250
250
280
45
31.2
16.4
375
2550
250
500
530
45
31.2
30.6
750
5050
500
500
530
113
203
59.2
1500
5075
500
750
780
113
203
87.8
2250
50100
500
1000
1030
113
203
116.4
3000
50125
500
1250
1280
113
203
145.0
3750
6060
600
600
630
113
203
78.6
2160
6090
600
900
930
113
203
116.4
3240
No need for vacuum assisted pumping
This product uses a vacuum injector and can operate as long as it passes through an air compressor.
Even if cutting oil, cutting water, or chips have been sucked into the machine, the machine can discharge them from the body.
After countless improvements, this product has finally simplified the components. Therefore, repairing with fewer faults is also very easy.
Any type of processed product can be made very complete
For upper level processing, side processing, and grinding operations, they can all be done very well.
Combined with the use of metal plates, perforation operations can be easily completed on surfaces and sides of objects with special shapes.
Can be adjusted in size at will
Change the combination and adjust the machine body according to the size of the processed object
The pedestal can be set according to the size of the processed object.
Setting of Health Slots and Job Timers
There is a keyway at the bottom of the body. Therefore, precise parallelism and straightness are obtained when working side by side.
Two operation limiters are installed on the side of the main body to prevent lateral forces from the balance side.
The following types of materials are suitable for processing on adsorption pliers
Light metals, heavy metals, iron plates, etc
Non magnetic flat surface processing items such as plastic products, ceramics, glass, aluminum, aluminum alloys, stainless steel, wood, stone, etc. without ventilation
An object with a small shape and a flat surface that requires complex processing.
When the outer surface needs to be fully processed, but there is no effective method to clamp the processed item.
When using traditional methods for processing, it may leave marks, skewness, bending, and other processed objects.
When it belongs to the ultra-thin type and cannot be processed by the clamp method on its surface or side.
Processed products with a flat surface but unique shape
Main assembly machinery and usage methods
Using semi-automatic precision milling machines for small product processing.
Using milling machines (frames) or NC frames for surface and side machining
Using a carving machine to process writing or details.
Paired with the auxiliary base to process the surface and side of the workpiece
This method uses vacuum pressure to suck and maintain the processed material, and then proceed with the processing. F=A × P/700F=suction force (KG)
A=effective area of the suction part (cm) ²） P=Action vacuum pressure (mmHG)
The vacuum pressure acting on the processed object and the size of the area. It is necessary to ensure compliance with the size of the processed material and achieve maximum suction area.
The supply of air pressure must remain stable
Mechanical instinct before homework, as well as the absence of cutting powder and chip oil inside and outside the objects to be processed.
The state of the seal and whether its material is well sealed.
The suction area and breathability of processed products.
Temperature, humidity, and bending condition of the product
Contact Us
Address: Room 902, No. 37 Dongyingshanhe, Jiefang East Road, Wuxi City
Telephone:0510 - 82728632/82722718
Mr. Kim:13806178314(WeChat)
Mr. Ma: 15961845963 (WeChat)
Ms. Zhang: 13861801693 (WeChat)
Email: wxyixinde@163.com
QQ：2775972360 1003515781